[01] Fatemeh Jamshidi, Department of Chemical Engineering, Sirjan Branch, Islamic Azad University, Sirjan, Iran. [02] Ramin Shamsi, Department of Chemical Engineering, Sirjan Branch, Islamic Azad University, Sirjan, Iran. [03] Farshad Farahbod, Department of Chemical Engineering, Firoozabad Branch, Islamic Azad University, Firoozabad, Iran.

The operating conditions chosen in petroleum industries depend on the characteristics of oil which is processed. Knowing about the behavior of oil fluid flow at different amounts of operating pressure and temperature is essential to manufacture the proper equipment and handling the processes. Results show, operating temperature changes from 30°C to 90°C. The increase in values of temperature increases the values of thermal conductivity from 1.17 to 1.19 W/m.C since the increase in the kinetic energy of material, usaually. The increase in the amount of temperature shows the same increasing effect on the thermal conductivity of nano oil. The presence of nano tin dioxide as nano metal oxide and also the free electorns in metal particles incraeses the kinetic energy of nano oil.

Oil, Viscosity, Reynolds, Friction Factor, Conductivity

[01] Gençer Emre, Agrawal Rakesh, Toward supplying food, energy, and water demand: Integrated solar desalination process synthesis with power and hydrogen coproduction, Resources, Conservation and Recycling, Volume 133, June 2018, Pages 331-342. [02] Rached Ben-Mansour, Pervez Ahmed, Habib M. A., Simulation of Oxy-fuel combustion of heavy oil fuelin a model furnace, J. Energy Resour. Technol. 2015, 137: 032206. [03] Shadi WH, Mamdouh TG, Nabil E. Heavy crude oil viscosity reduction and rheology for pipeline transportation. Fuel 2010; 89: 1095–100. [04] Martnez-Palou R, Mosqueira ML, Zapata-Rendَn B, Mar-Juلrez E, Bernal-Huicochea C, Clavel-Lpez J. C., Transportation of heavy and extra-heavy crude oil by pipeline: a review. J. Pet. Sci. Eng. 2011; 75: 274–82. [05] Zong Lu, Li Mingjie, Li Chaoxu, Intensifying solar-thermal harvest of low-dimension biologic nanostructures for electric power and solar desalination, Nano Energy, Volume 50, August 2018, Pages 308-315 [06] Al-harahsheh Mohammad, Abu-Arabi Mousa, Mousa Hasan, Alzghoul Zobaidah, Solar desalination using solar still enhanced by external solar collector and PCM, Applied Thermal Engineering, Volume 128, 5 January 2018, Pages 1030-1040. [07] Rana MS, Sلmano V, Ancheyta J, Diaz JAI. A review of recent advances on process technologies for upgrading of heavy oils and residua. Fuel 2007; 86: 1216–31. [08] Naseri A, Nikazar M, Mousavi DSA. A correlation approach for prediction of crude oil viscosities. J. Pet. Sci. Eng. 2005; 47: 163–74. [09] Hossain MS, Sarica C, Zhang HQ. Assessment and development of heavy-oil viscosity correlations. In: SPE International Thermal Operations and Heavy Oil Symposium, Kalgary, 1–3 November 2005. p. 1–9. [10] Alomair O, Elsharkawy A, Alkandari H. Viscosity predictions of Kuwaiti heavy crudes at elevated temperatures. In: SPE Heavy Oil Conference and Exhibition, Kuwait, 12–14 December 2011. p. 1–18. [11] Campos Bruno Lacerda de Oliveira, Costa Andréa Oliveira Souza da, Figueiredo Kátia Cecília de Souza, Junior Esly Ferreira da Costa, Performance comparison of different mathematical models in the simulation of a solar desalination by humidification-dehumidification, Desalination, Volume 437, 1 July 2018, Pages 184-194. [12] Barrufet MA, Setiadarma A. Reliable heavy oil-solvent viscosity mixing rules for viscosities up to 450 K, oil-solvent viscosity ratios up to 4 _ 105, and any solvent proportion. Fluid Phase Equilib. 2003; 213: 65–79. [13] Luis F. Ayala, Doruk Alp, Evaluation of “Marching Algorithms” in the Analysis of Multiphase Flow in Natural Gas Pipelines, J. Energy Resour. Technol. 2008; 130 (4), 043003. [14] Yilin Wang John, Well Completion for Effective Deliquification of Natural Gas wells, J. Energy Resour. Technol. 2011; 134 (1): 013102. [15] Chuan Lu, Huiqing Liu, Qiang Zheng, Qingbang Meng, Experimental Study of Reasonable Drawdown Pressure of Horizontal Wells in Oil Reservoir With Bottom Water, J. Energy Resour. Technol. 2014; 136 (3): 034502. [16] Junlai Wu; Yuetian Liu; Haining Yang, New Method of Productivity Equation for Multibranch Horizontal Well in Three-Dimensional Anisotropic Oil Reservoirs, J. Energy Resour. Technol. 2012; 134 (3): 032801-032801-5. [17] . Anuj Gupta, Performance Optimization of Abrasive Fluid Jet for Completion and Stimulation of Oil and Gas Wells, J. Energy Resour. Technol. 2012; 134 (2): 021001. [18] N. Bhuwakietkumjohn, S. Rittidech, Internal flow patterns on heat transfer characteristics of a closed-loop oscillating heat-pipe with check valves using ethanol and a silver nano-ethanol mixture, Exp. Therm. Fluid Sci. 34 (2010) 1000-1007. [19] T. Cho, I. Baek, J. Lee, S. Park, Preparation of nano-fluids containing suspended silver particles for enhancing fluid thermal conductivity offluids, J. Industrial Eng. Chem. 11 (2005) 400–406. [20] Pavel Ferkl, Richard Pokorný, Marek Bobák, Juraj Kosek, Heat transfer in one-dimensional micro- and nano-cellular foams, Chem. Eng. Sci. 97 (2013) 50-58. [21] S. P. Jang, S. U. S. Choi, Role of Brownian motion in the enhanced thermal conductivity of nanofluids, Appl. Phys. Letter. 84 (2004) 4316–4318. [22] A. E. Kabeel, El. Maaty T. Abou, Y. El. Samadony, The effect of using nano-particles on corrugated plate heat exchanger performance, Appl. Therm. Eng. 52 (2013) 221-229. [23] S. Nadeem, Rashid MehFe₂O₃d, Noreen Sher Akbar, Non-orthogonal stagnation point flow of a nano non-Newtonian fluid towards a stretching surface with heat transfer International, J. Heat Mass Trans. 57 (2013) 679-689. [24] Hamid Reza Taghiyari, Effects of Nano-Silver and Nano-Zycosil on Mechanical Strength of Heat, Vapor, and Dry-Ice-Treated Biscuit and Dovetail Medium-Density Fiberboard Miter Joints, Mat. Des. 51 (2013) 695–700. [25] X. Wang, J. Xian, L. Hai, L. Xin, W. Fang, F. Zhou, L. Fang, Stability of TiO₂ and Al₂O₃ nanofluids, Chin. Phys. Letter. 28 (2011) 086601. [26] W. C. Wei, S. H. Tsai, S. Y. Yang, S. W. Kang, Effect of nano-fluid on heat pipe thermal performance, in: Proceedings of the 3rd IASME/ WSEAS International Conference on Heat Transfer, Therm. Eng. Environ. 2 (2005a) 115–117. [27] W. C. Wei, S. H. Tsai, S. Y. Yang, S. W. Kang, Effect of nano-fluid concentration on heat pipe thermal performance, IASME Trans. 2 (2005b) 1432–1439. [28] Ahn, C. K., Kim, Y. M., Woo, S. H., Park, J. M., 2008. Soil washing using various nonionic surfactants and their recovery by selective adsorption with activated carbon. J. Hazard. Mater. 154, 153–160. [29] Barnea, E., Mizrahi, J., 1973. A generalized approach to the fluid dynamics of particulate systems: Part 1. General correlation for fluidization and sedimentation in solid multiparticle systems. Chem. Eng. J. 5, 171–189. [30] Zhang Binbin, Jaiswal Prakhar, Rai Rahul, Nelaturi Saigopal, Additive Manufacturing of Functionally Graded Objects: A Review, J. Comput. Inf. Sci. Eng, (2018); doi: 10.1115/1.4039683. [31] Dong, X., Pham, T., Yu, A., Zulli, P., 2009. Flooding diagram for multi-phase flow in a moving bed. ISIJ Int. 49, 189–194. [32] Elgin, J. C., Foust, H. C., 1950. Countercurrent flow of particles through moving fluid. Ind. Eng. Chem. 42, 1127–1141. [33] Garside, J., Al-Dibouni, M. R., 1977. Velocity-voidage relationships for fluidization and sedimentation in solid–liquid systems. Ind. Eng. Chem. Proc. Des. Dev. 16, 206–214. [34] Mourtzis Dimitris, Milas Nikolaos, Vlachou Aikaterini, An Internet of Things-Based Monitoring System for Shop-Floor Control, J. Comput. Inf. Sci. Eng. 2018; 18 (2): 021005-021005-10. doi: 10.1115/1.4039429. [35] Gong, Z., Alef, K., Wilke, B. M., Li, P., 2007. Activated carbon adsorption of PAHs from vegetable oil used in soil remediation. J. Hazard. Mater. 143, 372–378. [36] Lau, E. V., Gan, S., Ng, H. K., Poh, P. E., 2014. Extraction agents for the removal of polycyclic aromatic hydrocarbons (PAHs) from soil in soil washing technologies. Environ. Pollut. 184, 640–649. [37] Li, X., Du, Y., Wu, G., Li, Z., Li, H., Sui, H., 2012. Solvent extraction for heavy crude oil removal from contaminated soils. Chemosphere 88, 245–249. [38] Lian, J., Du, Y., Zhang, K., Liu, P., Li, Z., Li, X., 2008. Study on organic solvent desorption of soils contaminated with heavy concentration petroleum hydrocarbons. Mod. Chem. Ind. 28 (8), 60–63. [39] Viglianti, C., Hanna, K., De Brauer, C., Germain, P., 2006. Removal of polycyclic aromatic hydrocarbons from aged-contaminated soil using cyclodextrins: experimental study. Environ. Pollut. 140, 427–435. [40] Wu, G., Li, X., Coulon, F., Li, H., Lian, J., Sui, H., 2011. Recycling of solvent used in a solvent extraction of petroleum hydrocarbons contaminated soil. J. Hazard. Mater. 186, 533–539. [41] Wu, G., (PhD thesis) 2012. Insights into Sustainable Environmental Remediation Approaches and the Fate and Transport of Petroleum Hydrocarbons in Soils. [42] Tianjin University, Tianjin. Wu, G., Coulon, F., Yang, Y., Li, H., Sui, H., 2013a. Combining solvent extraction and bioremediation for removal of weathered petroleum in soil. Pedosphere 23, 455–463. [43] Wu, G., Kechavarzi, C., Li, X., Wu, S., Pollard, S. J., Sui, H., Coulon, F., 2013b. Machine learning models for predicting PAHs bioavailability in compost amended soils. Chem. Eng. J. 223, 747–754. [44] Zhou, W., Zhu, L., 2007. Efficiency of surfactant-enhanced desorption for contaminated soils depending on the component characteristics of soil-surfactant-PAHs system. Environ. Pollut. 147, 66–73. [45] M. H. Yazdi, S. Abdullah, I. Hashim, K. Sopian, Slip MHD liquid flow and heat transfer over non-linear permeable stretching surface with chemical reaction, Int. J. Heat Mass Transf. 54 (2011) 3214–3225. [46] M. S. Abel, Heat transfer in a liquid film over an unsteady stretching surface with viscous dissipation in presence of external magnetic field, Appl. Math. Figure 8. (a) Local mass transfer coefficients for the stretching and elastic sheets with various mass suction and blowing. (b) Local mass transfer coefficients for the stretching sheet with various Schmidt and magnetic interaction parameters. 158 R. Ahmad / Journal of Magnetism and Magnetic Materials 398 (2016) 148–159 Model. 33 (2009) 3430–3441. [47] Toke Christensen Esben, I. J. Forrester Alexander, Lund Erik, Lindgaard Esben, Developing Metamodels for Fast and Accurate Prediction of the Draping of Physical Surfaces, J. Comput. Inf. Sci. Eng. 2018; 18 (2): 021003-021003-12. doi: 10.1115/1.4039334. [48] R. Ahmad, W. A. Khan, Numerical study of heat and mass transfer mhd viscous flow over a moving wedge in the presence of viscous dissipation and heat source/sink with convective boundary condition, Heat Transf.—Asian Res. 43 (2014) 17–38.