International Journal of Chemical and Biomolecular Science
Articles Information
International Journal of Chemical and Biomolecular Science, Vol.4, No.3, Sep. 2018, Pub. Date: Aug. 31, 2018
Empirical Investigation Electrical Properties of Drilling Fluid; Introduction of Novel Drilling Fluid for Drilling Process
Pages: 24-28 Views: 434 Downloads: 263
Authors
[01] Sorayya Koofe Gheshmi, Department of Chemical Engineering, Sirjan Branch, Islamic Azad University, Sirjan, Iran.
[02] Farshad Farahbod, Department of Chemical Engineering, Firoozabad Branch, Islamic Azad University, Firoozabad, Iran.
Abstract
The drilling fluid is a basic fluid which is applicable and so important in the drilling process. This fluid is not ignorable so the performance of nano drilling fluid is considered in this paper. In fact, the metal nano oxide is mixed with drilling fluid in an ultrasonic vessel and the physical properties of this fluid are measured, experimentally. The electrical properties of drilling fluid have important role in the heat transfer mechanisms. The ability of drilling fluid in the transfer of heat from gimlet to drilling fluid is one of duty of this fluid. The effects of nano particles on the thermo electrical and in fact, the rheological properties of drilling fluid are investigated in this research. The experimental results show, For 30 centigrade degree, amount of electrical conductivity is changed from 220 to 286 micro Siemens per centimeter, approximately. In addition, for 40 centigrade degree, the amount of electrical conductivity is changed between the 225 to 281 micro Siemens per centi meter, approximately. Temperature variations of drilling fluid for this experiment are fixed in the 50 Centigrade degree. All of the results are fitted by mathematical polynomial. Obtained results show, the ability of distributed nano particles in the text of drilling fluid is powerful in heat transfer, totally.
Keywords
E.C., Thermal Conductivity, Drilling Fluid, Concentration, High Performance
References
[01] American Petroleum Institute, 2005. Recommended Practice for Testing Well Drillings. API Publishing Services, Washington, D. C., pp: 171.
[02] Zhang Rui, Wu Hao, Si Xiaodong, Zhao Lingling, Yang Linjun, Improving the removal of fine particulate matter based on heterogeneous condensation in desulfurized flue gas, Fuel Processing Technology, Volume 174, 1 June 2018, Pages 9-16.
[03] Pan Peiyuan, Chen Heng, Liang Zhiyuan, Zhao Qinxin, Desulfurized flue gas corrosion coupled with deposits in a heating boiler, Corrosion Science, Volume 131, February 2018, Pages 126-136.
[04] Cordoba Patricia, C. Staicu Lucian, Flue gas desulfurization effluents: An unexploited selenium resource, Fuel, Volume 223, 1 July 2018, Pages 268-276.
[05] Frittella, B. S. F., B. J. Services and M. Babbo, 2009. Best practices and lessons learned from 15 years of experience of drilling depth wells in italy. Proceeding of the SPE/IADC Middle East Drilling Technology Conference and Exhibition, October 26-28, Manama, Bahrain.
[06] Tseng Chien-Chou, Li Cheng-Jui, Eulerian-Eulerian numerical simulation for a flue gas desulfurization tower with perforated sieve trays, International Journal of Heat and Mass Transfer, Volume 116, January 2018, Pages 329-345.
[07] Guillot, D., 2006. Rheology of Well Drilling Slurries. In: Nelson, E. B. and D. Guillot (Eds.), Well Drilling. Texas, Schlumberger, pp: 93-142.
[08] Wang Dongpeng, Lu Yonghong, Li Zhe, Wang Xiaoli, Xu Haibo, Integrated electrochemical-aerating oxidation in recovery system of seawater flue gas desulfurization, Chemical Engineering Journal, Volume 338, 15 April 2018, Pages 184-190.
[09] Zhao Yonggan, Wang Shujuan, Li Yan, Liu Jia, Zhuo Yuqun, Chen Hongxiang, Wang Jing, Xu Lizhen, Sun Zhentao, Extensive reclamation of saline-sodic soils with flue gas desulfurization gypsum on the Songnen Plain, Northeast China, Geoderma, Volume 321, 1 July 2018, Pages 52-60.
[10] Kulakofsky, D. and R. Vargo, 2005. New technology for the delivery of beaded lightweight drillings. Proceeding of the SPE Annual Technical Conference and Exhibition, October 9-12, Dallas, Texas.
[11] Labibzadeh, M., B. Zahabizadeh and A. Khajehdezfuly, 2010. Early-age compressive strength assessment of oil well class G drilling due to borehole pressure and temperature changes. Science, 6 (7): 38-47.
[12] Fang Dean, Liao Xiang, Zhang Xuefei, Teng Aijun, Xue Xiangxin, A novel resource utilization of the calcium-based semi-dry flue gas desulfurization ash: As a reductant to remove chromium and vanadium from vanadium industrial wastewater, Journal of Hazardous Materials, Volume 342, 15 January 2018, Pages 436-445.
[13] Miranda, C. R., R. D. Petrobras, F. Toledo and E. M. R. Fairbairn, 2010. New design of high-performance drilling systems for zonal isolation: Influence on porosity, rheological parameters and chemical and mechanical resistance. Proceeding of the SPE Latin American and Caribbean Petroleum Engineering Conference, December 1-3, Lima, Peru.
[14] Li Chunfeng, Duan Yufeng, Tang Hongjian, Zhu Chun, Li Ya-ning, Zheng Yiwu, Liu Meng, Study on the Hg emission and migration characteristics in coal-fired power plant of China with an ammonia desulfurization process, Fuel, Volume 211, 1 January 2018, Pages 621-628.
[15] Neubauer Raphael, Weinlaender Christof, Kienzl Norbert, Bitschnau Brigitte, Schroettner Hartmuth, Hochenauer Christoph, Adsorptive on-board desulfurization over multiple cycles for fuel-cell-based auxiliary power units operated by different types of fuels, Journal of Power Sources, Volume 385, 1 May 2018, Pages 45-54.
[16] M. Živković Emila, V. Živković Nikola, M. Majstorović Divna, M. Stanimirović Andrej, Lj. Kijevčanin Mirjana, Volumetric and transport properties of binary liquid mixtures with 1-ethyl-3-methylimidazolium ethyl sulfate as candidate solvents for regenerative flue gas desulfurization processes, The Journal of Chemical Thermodynamics, Volume 119, April 2018, Pages 135-154.
[17] Mourtzis Dimitris, Milas Nikolaos, Vlachou Aikaterini, An Internet of Things-Based Monitoring System for Shop-Floor Control, J. Comput. Inf. Sci. Eng. 2018; 18 (2): 021005-021005-10. doi: 10.1115/1.4039429.
[18] Toke Christensen Esben, I. J. Forrester Alexander, Lund Erik, Lindgaard Esben, Developing Metamodels for Fast and Accurate Prediction of the Draping of Physical Surfaces, J. Comput. Inf. Sci. Eng. 2018; 18 (2): 021003-021003-12. doi: 10.1115/1.4039334.
[19] Shahriar, A. and M. L. Nehdi, 2012. Optimization of rheological properties of oil well drilling slurries using experimental design. Mater. Struct., 45 (9): 1403-1423.
[20] Zhang Binbin, Jaiswal Prakhar, Rai Rahul, Nelaturi Saigopal, Additive Manufacturing of Functionally Graded Objects: A Review, J. Comput. Inf. Sci. Eng, (2018); doi: 10.1115/1.4039683.
600 ATLANTIC AVE, BOSTON,
MA 02210, USA
+001-6179630233
AIS is an academia-oriented and non-commercial institute aiming at providing users with a way to quickly and easily get the academic and scientific information.
Copyright © 2014 - American Institute of Science except certain content provided by third parties.